today we’re taking a look at a motorized sit-stand desk…Flexispot Manual… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I mostly simply supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. If you do not believe me, have a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much thought.
On top of being practical, it also looks fantastic in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are much more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this implied it was going to be durable) and also a little hesitant (due to the fact that all of us know how much of a challenge putting together furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once put together, I love the smooth appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near to that as I could on uplifts site with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you need to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not damaged in any way which is entirely bizarre since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough man if I had actually purchased this I ‘d have been on the phone with customer care immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function strangely absolutely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated as well to both the double phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a cost would be the one benefit I would give this system over the uplift desk and I wish to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furnishings that will last you this at finest seems like a less expensive imitation of that it just does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their site also which likewise feels eerily similar to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering numerous options and devices I could but I believe I’m happier that they only sent out a basic desk due to the fact that as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of extras is the move when the core product isn’t what it must be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Manual
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the extra money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged but from a client perspective you ‘d probably be actually excited to get this in