today we’re having a look at a motorized sit-stand desk…Flexispot Maple Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s really simple to put together, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. Examine out the video listed below of it operating while there’s a person lying down on it if you do not believe me.
The electrical raise/lower function is not just easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to stay comfy, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this suggested it was going to be strong) and also a little hesitant (because we all know just how much of an obstacle assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the sleek look of this desk. I’m positive any of the many diverse surfaces that it is available in would look great in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as many times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you ought to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is entirely unusual due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had acquired this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the double phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the sound is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to take a look at their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our valuable time covering different choices and accessories I might but I think I’m better that they only sent a standard desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the move when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Maple Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the money it’s gon na take to enter a greater end manufacturer like uplift desk or very desk and I haven’t personally used really desk items so I can’t speak on it but their credibility is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d probably be actually thrilled to get this in