today we’re having a look at a motorized sit-stand desk…Flexispot Memory Controller… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you don’t believe me, check out the video below of it operating while there’s a person resting on it.
The electric raise/lower function is not just easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be tough) and likewise a little reluctant (since all of us know just how much of a challenge assembling furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as lot of times as you desire throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a hefty home computer (or wish to rest on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I attempted to get as near to that as I could on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get lacking even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough guy if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated as well to both the dual stage double motor and a three-stage dual motor which pushes the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would give this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% less expensive even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper does not suggest cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my prepare for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a less expensive imitation of that it just doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to have a look at their site too which also feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our valuable time covering various choices and accessories I might however I believe I’m happier that they just sent out a standard desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Memory Controller
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would spend the extra money it’s gon na take to get into a greater end producer like uplift desk or very desk and I have not personally used extremely desk items so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged however from a consumer viewpoint you ‘d probably be really delighted to get this in