today we’re taking a look at a motorized sit-stand desk…Flexispot Metal Height Adjustable Standing Desk… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a great deal of weight. Examine out the video below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s likewise remarkably smooth and peaceful.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also practical if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has options that are even more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this suggested it was going to be tough) and also a little reluctant (since all of us understand how much of a difficulty assembling furniture can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to sleep on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I might on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for evaluation however as you should know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get doing not have even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had acquired this I ‘d have been on the phone with customer service right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function oddly definitely where any type of cable television management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my plan for this desk at this moment is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website as well which likewise feels strangely comparable to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might spend another 10 minutes of our precious time covering various choices and accessories I could but I believe I’m happier that they only sent a basic desk because as a basic desk I’m not a fan of the quality control at this cost point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it need to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is seven years if you are Flexispot Metal Height Adjustable Standing Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance but I would invest the money it’s gon na take to get into a greater end manufacturer like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed but from a consumer viewpoint you ‘d most likely be really delighted to get this in