today we’re taking a look at a motorized sit-stand desk…Flexispot Military Discount… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely positive.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s very tough and can hold a lot of weight. If you do not think me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower function is not only easy to use and quick, but it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being functional, it likewise looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise handy if your furry colleague likes to chew on or play with your cables.
Flexispot has alternatives that are even more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the instructions.
You will require to purchase an anti-fatigue mat to stay comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (because this implied it was going to be tough) and likewise a little reluctant (due to the fact that we all know how much of an obstacle assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change between sitting and standing as lot of times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as close to that as I might on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to know by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had acquired this I ‘d have been on the phone with customer support right away they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would offer this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived damaged too my plan for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best seems like a less expensive imitation of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their website too which likewise feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering various options and devices I might however I believe I’m better that they only sent out a basic desk since as a standard desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Military Discount
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and productivity but I would spend the additional money it’s gon na take to get into a greater end manufacturer like uplift desk or really desk and I have not personally utilized really desk items so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a client viewpoint you ‘d probably be really delighted to get this in