today we’re having a look at a motorized sit-stand desk…Flexispot Monitor Arm… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you do not believe me, take a look at the video below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not only easy to use and fast, but it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how strong the Flexispot is.
The practical cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this meant it was going to be sturdy) and also a little hesitant (due to the fact that all of us know how much of an obstacle putting together furniture can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the smooth look of this desk. I’m confident any of the many diverse finishes that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as lot of times as you desire throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as close to that as I might on uplifts website with comparable configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable television grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely bizarre due to the fact that I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly definitely where any type of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my plan for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at best feels like a less expensive imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do feel free to check out their website as well which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering numerous choices and devices I could but I believe I’m better that they just sent out a basic desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of extras is the move when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Monitor Arm
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would spend the additional money it’s gon na take to get into a greater end producer like uplift desk or very desk and I haven’t personally utilized really desk products so I can’t speak on it but their credibility is great huge thanks to flexi area for sending this out for review sadly I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a consumer viewpoint you ‘d most likely be really delighted to get this in