today we’re taking a look at a motorized sit-stand desk…Flexispot Montage… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was extremely favorable.
It’s extremely easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. Examine out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also valuable if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more economical than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The hassle-free cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the guidelines.
You will require to buy an anti-fatigue mat to stay comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (since this suggested it was going to be strong) and also a little hesitant (since we all know how much of an obstacle putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m confident any of the many varied surfaces that it is available in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is quite standard I tried to get as near that as I could on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation but as you must understand by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can possibly get lacking even any cable grommets for go through the outdoors container
for the desktop was not damaged in any way which is entirely unusual because I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough man if I had actually acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this rate point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furniture that will last you this at best seems like a more affordable replica of that it just doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to take a look at their site also which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering numerous options and accessories I might however I believe I’m happier that they only sent a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Montage
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency but I would invest the extra money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally used very desk items so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a consumer viewpoint you ‘d probably be actually excited to get this in