today we’re taking a look at a motorized sit-stand desk…Flexispot Nl… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very positive.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly strong and can hold a great deal of weight. If you don’t believe me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t always a substantial fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (because this indicated it was going to be strong) and also a little hesitant (since we all understand how much of a challenge assembling furnishings can be).
The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I like the smooth appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as lot of times as you want throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite fundamental I attempted to get as near that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you should understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can possibly get lacking even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is utterly bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had bought this I ‘d have been on the phone with customer support immediately they did likewise managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that permits up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here harmed as well my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a stationary exercise bike and I might spend another 10 minutes of our valuable time covering various alternatives and accessories I might however I believe I’m better that they just sent a fundamental desk since as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Nl
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and efficiency however I would spend the extra money it’s gon na require to enter a higher end producer like uplift desk or very desk and I have not personally used really desk products so I can’t speak on it but their reputation is great big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged however from a customer perspective you ‘d most likely be actually delighted to get this in