today we’re taking a look at a motorized sit-stand desk…Flexispot Oder Ikea… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Examine out the video below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower feature is not only easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how strong the Flexispot is.
The hassle-free cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (considering that this implied it was going to be tough) and also a little reluctant (since all of us understand just how much of a challenge assembling furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m positive any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I attempted to get as near to that as I could on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you need to understand by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough male if I had actually purchased this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function oddly definitely where any sort of cable management products whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the dual phase dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this model does come standard with the control panel that permits up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would give this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely infuriating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged also my plan for this desk at this point is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furnishings that will last you this at finest feels like a less expensive replica of that it simply does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their website as well which likewise feels eerily similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering various choices and accessories I could however I believe I’m better that they only sent a basic desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years very desk is 5 years and uplift desk is 7 years if you are Flexispot Oder Ikea
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and productivity however I would spend the money it’s gon na take to enter into a higher end producer like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is excellent big thanks to flexi area for sending this out for review regrettably I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters showed up damaged but from a customer perspective you ‘d probably be actually delighted to get this in