today we’re taking a look at a motorized sit-stand desk…Flexispot Office Chair Review… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s really easy to put together, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you do not think me, check out the video listed below of it operating while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and quickly, however it’s likewise surprisingly smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are even more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how tough the Flexispot is.
The hassle-free cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this indicated it was going to be sturdy) and likewise a little hesitant (due to the fact that we all know just how much of a difficulty assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the directions.
Is it worth getting a standing desk?
When put together, I enjoy the smooth look of this desk. I’m positive any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop (or wish to rest on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near that as I might on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you need to know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable television grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had purchased this I ‘d have been on the phone with customer support instantly they did likewise handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the dual stage double motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that allows for up-and-down motion plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a rate would be the one advantage I would provide this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged too my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furnishings that will last you this at finest seems like a more affordable imitation of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site also which also feels eerily comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our valuable time covering numerous choices and devices I might but I think I’m happier that they just sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a bunch of extras is the relocation when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years extremely desk is five years and uplift desk is seven years if you are Flexispot Office Chair Review
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency but I would spend the money it’s gon na take to enter a higher end maker like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it but their track record is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged however from a customer viewpoint you ‘d most likely be actually delighted to get this in