today we’re taking a look at a motorized sit-stand desk…Flexispot Oka Bs9… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you don’t believe me, take a look at the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without giving it much thought.
On top of being practical, it likewise looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are much more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (because this indicated it was going to be durable) and also a little hesitant (since we all understand how much of an obstacle assembling furniture can be).
Thankfully, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the streamlined look of this desk. I’m confident any of the many diverse finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as often times as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I attempted to get as close to that as I could on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for go through the outside container
for the desktop was not damaged in any way which is utterly unusual since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough guy if I had actually purchased this I ‘d have been on the phone with customer service instantly they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars less expensive than the uplift but more affordable doesn’t suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the noise and this baffle is absolutely frustrating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed as well my prepare for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at finest feels like a more affordable replica of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous alternatives and devices I might however I believe I’m better that they just sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of additionals is the move when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they warranty their desks for three years extremely desk is five years and uplift desk is 7 years if you are Flexispot Oka Bs9
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the extra money it’s gon na take to get into a higher end maker like uplift desk or very desk and I haven’t personally used very desk items so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for evaluation sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters showed up damaged but from a consumer perspective you ‘d most likely be truly thrilled to get this in