today we’re taking a look at a motorized sit-stand desk…Flexispot Pro Series Desk… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. If you do not believe me, have a look at the video listed below of it operating while there’s a person resting on it.
The electric raise/lower function is not only easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being practical, it also looks great in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how sturdy the Flexispot is.
The convenient cable tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be sturdy) and likewise a little hesitant (since we all know how much of a challenge putting together furnishings can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable television grommets for go through the outside container
for the desktop was not damaged in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply very rough man if I had actually acquired this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any kind of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage design that comes requirement with the uplift desk this can be updated too to both the double phase dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory spots with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would offer this system over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive does not suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely infuriating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged also my plan for this desk at this point is to lose the desk top and included all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable replica of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their site as well which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk approximately and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering numerous alternatives and accessories I might however I think I’m happier that they just sent a basic desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of extras is the relocation when the core item isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Pro Series Desk
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would invest the additional money it’s gon na take to enter a higher end producer like uplift desk or very desk and I haven’t personally used really desk products so I can’t speak on it however their reputation is great huge thanks to flexi area for sending this out for review regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d most likely be truly thrilled to get this in