today we’re taking a look at a motorized sit-stand desk…Flexispot Red Oak… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very durable and can hold a lot of weight. Check out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electric raise/lower feature is not just easy to use and quickly, however it’s also remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being practical, it likewise looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to install. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this suggested it was going to be durable) and likewise a little hesitant (since all of us understand how much of an obstacle putting together furnishings can be).
The good news is, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I enjoy the sleek look of this desk. I’m positive any of the many diverse surfaces that it comes in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or wish to sleep on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation but as you must know by now doesn’t impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for go through the outdoors container
for the desktop was not harmed in any way which is entirely strange because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply very rough male if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated also to both the dual stage dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% less expensive even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but more affordable does not imply low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is definitely frustrating to top things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this moment is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do feel free to check out their site also which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various options and accessories I could but I believe I’m better that they just sent out a basic desk because as a basic desk I’m not a fan of the quality control at this rate point and I do not believe slapping on a lot of additionals is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Red Oak
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and performance but I would invest the additional money it’s gon na require to enter a greater end producer like uplift desk or really desk and I have not personally utilized extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for evaluation regrettably I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a consumer viewpoint you ‘d probably be actually excited to get this in