today we’re taking a look at a motorized sit-stand desk…Flexispot Reklamation… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. Inspect out the video below of it running while there’s an individual lying down on it if you do not think me.
The electrical raise/lower function is not only easy to use and quick, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without giving it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are even more cost effective than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how strong the Flexispot is.
The practical cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (given that this suggested it was going to be tough) and also a little reluctant (since we all understand just how much of a challenge assembling furniture can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the streamlined look of this desk. I’m positive any of the many diverse finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, effective, and peaceful to change in between sitting and standing as often times as you want throughout the day.
This desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it won’t wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near to that as I might on uplifts website with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you must know by now doesn’t affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just extremely rough male if I had actually purchased this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any sort of cable television management materials whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control board that enables up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is extremely quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but cheaper does not indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my plan for this desk at this moment is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to have a look at their site too which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering numerous alternatives and devices I could but I think I’m better that they only sent a basic desk because as a standard desk I’m not a fan of the quality control at this rate point and I do not think slapping on a lot of bonus is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Reklamation
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and performance but I would spend the extra money it’s gon na take to get into a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized really desk items so I can’t speak on it however their reputation is very good big thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with seeing as how both the desktop and the casters got here harmed but from a client perspective you ‘d most likely be truly excited to get this in