today we’re taking a look at a motorized sit-stand desk…Flexispot Review… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you don’t think me, check out the video below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without offering it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise helpful if your furry coworker likes to chew on or have fun with your cables.
Flexispot has alternatives that are far more budget-friendly than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (considering that this implied it was going to be sturdy) and also a little hesitant (due to the fact that all of us know how much of a challenge assembling furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many varied finishes that it can be found in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as many times as you want throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as near that as I might on uplifts site with comparable setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review but as you ought to understand by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors container
for the desktop was not harmed in any way which is absolutely unusual due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply incredibly rough man if I had actually bought this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any sort of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a cost would be the one benefit I would provide this unit over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift model over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this point is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a more affordable replica of that it just doesn’t feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their website as well which likewise feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering various options and accessories I could but I believe I’m better that they just sent a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is seven years if you are Flexispot Review
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity but I would spend the money it’s gon na take to enter into a higher end manufacturer like uplift desk or really desk and I have not personally utilized very desk items so I can’t speak on it however their credibility is excellent huge thanks to flexi spot for sending this out for review regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters got here damaged but from a consumer viewpoint you ‘d most likely be really excited to get this in