today we’re having a look at a motorized sit-stand desk…Flexispot Rising Desk… you might have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise remarkably smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much idea.
On top of being practical, it also looks excellent in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has alternatives that are much more affordable than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this meant it was going to be strong) and likewise a little hesitant (due to the fact that all of us understand just how much of a challenge assembling furniture can be).
Luckily, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise equally distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you ought to know by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can potentially get doing not have even any cable grommets for travel through the outside container
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had actually acquired this I ‘d have been on the phone with customer care right away they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly definitely where any sort of cable television management materials whatsoever the frame on this unit is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down motion plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is absolutely infuriating to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up harmed as well my prepare for this desk at this point is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it simply doesn’t feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their site also which also feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a stationary stationary bicycle and I might invest another 10 minutes of our precious time covering numerous options and devices I might however I think I’m happier that they only sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Rising Desk
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and efficiency however I would invest the extra money it’s gon na require to enter a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with viewing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d probably be truly delighted to get this in