today we’re taking a look at a motorized sit-stand desk…Flexispot Rollentrainer… you may have seen my review on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. If you do not think me, take a look at the video listed below of it operating while there’s a person resting on it.
The electric raise/lower feature is not just easy to use and quickly, but it’s likewise remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being practical, it also looks terrific in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise handy if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are far more economical than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just an effect of how sturdy the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be strong) and also a little hesitant (due to the fact that all of us know how much of a difficulty putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When assembled, I enjoy the streamlined appearance of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and quiet to change between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite basic I tried to get as close to that as I might on uplifts site with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you must understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for travel through the outdoors carton
for the desktop was not damaged in any way which is utterly strange due to the fact that I could shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply very rough male if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly definitely where any sort of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is extremely peaceful as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift but cheaper does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that but the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed also my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furniture that will last you this at finest feels like a more affordable imitation of that it just does not feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous alternatives and devices I could however I believe I’m happier that they only sent out a standard desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a bunch of additionals is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Rollentrainer
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and efficiency but I would spend the additional money it’s gon na take to get into a greater end maker like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it but their track record is great big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with seeing as how both the desktop and the casters got here harmed but from a customer perspective you ‘d probably be truly thrilled to get this in