today we’re taking a look at a motorized sit-stand desk…Flexispot S6… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video below of it operating while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t always a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how tough the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (since this meant it was going to be strong) and also a little reluctant (due to the fact that all of us know how much of an obstacle putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek appearance of this desk. I’m positive any of the many varied surfaces that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I could on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is utterly strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply super rough male if I had actually acquired this I ‘d have been on the phone with customer care instantly they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual stage dual motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I stay at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would provide this unit over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is absolutely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed too my prepare for this desk at this moment is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is a financial investment in quality office furnishings that will last you this at finest feels like a cheaper imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels eerily similar to among their rivals there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a stationary stationary bicycle and I might spend another 10 minutes of our precious time covering various alternatives and accessories I might however I believe I’m better that they just sent a fundamental desk since as a standard desk I’m not a fan of the quality control at this cost point and I do not think slapping on a lot of additionals is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot S6
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance however I would spend the additional money it’s gon na take to enter into a higher end maker like uplift desk or extremely desk and I haven’t personally utilized extremely desk items so I can’t speak on it however their track record is great huge thanks to flexi spot for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d probably be actually delighted to get this in