today we’re taking a look at a motorized sit-stand desk…Flexispot S6T… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are lots of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very easy to assemble, and it took my 11-year-old child and I (I mainly simply monitored) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (since this indicated it was going to be durable) and also a little reluctant (since we all understand just how much of a challenge assembling furnishings can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
When put together, I love the sleek appearance of this desk. I’m confident any of the many varied surfaces that it is available in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near that as I could on uplifts website with equivalent setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just very rough man if I had actually bought this I ‘d have been on the phone with customer care right away they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one benefit I would offer this system over the uplift desk and I want to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t indicate inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to check out their site also which also feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering different options and devices I might however I believe I’m better that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot S6T
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of video gaming and efficiency however I would spend the extra money it’s gon na require to enter a greater end manufacturer like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a consumer standpoint you ‘d probably be really excited to get this in