Find Flexispot Seiffen Laminated Standing Desk 2022

today we’re having a look at a motorized sit-stand desk…Flexispot Seiffen Laminated Standing Desk… you might have seen my evaluation on the uplift desk, if not …

In general, I must say I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was extremely favorable.

It’s really simple to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a great deal of weight. Check out the video below of it operating while there’s a person lying down on it if you do not think me.

The electric raise/lower feature is not just easy to use and quick, however it’s likewise remarkably smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change between the two without giving it much idea.
On top of being functional, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has choices that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a substantial fan of:

The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply an effect of how tough the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both excited (because this implied it was going to be sturdy) and also a little hesitant (since we all understand just how much of a challenge putting together furniture can be).

Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t discussed well in the instructions.

When assembled, I love the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of office.

The quiet operation and height memory settings make it simple, efficient, and peaceful to change between sitting and standing as lot of times as you want throughout the day.

Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.

 

in that video is pretty kitted out as the desk we’re looking at today is pretty standard I tried to get as close to that as I might on uplifts website with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for openness flexi area did send this desk out for evaluation however as you should know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable grommets for pass through the outdoors carton

for the desktop was not harmed in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply incredibly rough guy if I had acquired this I ‘d have been on the phone with customer support immediately they did also handled to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function unusually absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage style that comes standard with the uplift desk this can be updated too to both the double phase double motor and a three-stage double motor which presses the cost of the desk up

an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to beware here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when

this desk sees any lateral motion at all the drive shaft strikes this baffle and the sound is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed too my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our valuable time covering various alternatives and accessories I might however I think I’m better that they just sent a basic desk since as a fundamental desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of bonus is the relocation when the core item isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Seiffen Laminated Standing Desk

in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to gaming and productivity but I would spend the money it’s gon na take to enter into a greater end maker like uplift desk or very desk and I haven’t personally utilized very desk items so I can’t speak on it however their reputation is very good huge thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a customer standpoint you ‘d most likely be really thrilled to get this in

Published