today we’re having a look at a motorized sit-stand desk…Flexispot Shoop… you may have seen my review on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and fast, however it’s also surprisingly smooth and quiet.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being functional, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also helpful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more budget friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The practical cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this suggested it was going to be strong) and likewise a little hesitant (due to the fact that we all understand how much of a challenge putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the directions.
Is it worth getting a standing desk?
Once put together, I love the streamlined look of this desk. I’m confident any of the many varied finishes that it comes in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as many times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or wish to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty basic I attempted to get as near to that as I might on uplifts website with similar setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is really five inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre due to the fact that I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had actually acquired this I ‘d have been on the phone with client service immediately they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each part to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this unit is a single motor dual stage design versus the double motor three-stage style that comes requirement with the uplift desk this can be updated too to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you upgrade this flexi area test to the double motor three-stage design it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive doesn’t indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely frustrating to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged as well my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at finest seems like a cheaper imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their website as well which also feels eerily similar to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering various choices and devices I could however I think I’m better that they just sent out a fundamental desk because as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a lot of additionals is the move when the core product isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is seven years if you are Flexispot Shoop
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance however I would spend the additional money it’s gon na require to enter a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized extremely desk items so I can’t speak on it but their credibility is excellent huge thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged but from a customer viewpoint you ‘d most likely be really thrilled to get this in