today we’re having a look at a motorized sit-stand desk…Flexispot Single Monitor Arm… you might have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very strong and can hold a great deal of weight. Inspect out the video below of it operating while there’s an individual lying down on it if you don’t think me.
The electrical raise/lower feature is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without offering it much idea.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise handy if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable television tray was a little bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (considering that this meant it was going to be sturdy) and likewise a little hesitant (because we all know how much of an obstacle assembling furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
Once assembled, I like the smooth appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as many times as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to take a nap on it for some reason) it has you covered. It will also uniformly distribute weight no matter how unbalanced the weight you place on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I could on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review however as you ought to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely bizarre due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough male if I had purchased this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the double stage dual motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is definitely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furnishings that will last you this at finest seems like a less expensive imitation of that it simply doesn’t feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their site as well which likewise feels strangely similar to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering various options and accessories I might but I think I’m better that they only sent a fundamental desk because as a standard desk I’m not a fan of the quality control at this price point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Single Monitor Arm
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would spend the money it’s gon na require to enter a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk products so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for evaluation regrettably I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a client standpoint you ‘d most likely be really thrilled to get this in