today we’re having a look at a motorized sit-stand desk…Flexispot Sit… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very positive.
It’s very easy to put together, and it took my 11-year-old daughter and I (I mostly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a lot of weight. If you don’t believe me, take a look at the video below of it operating while there’s a person resting on it.
The electrical raise/lower feature is not just easy to use and quickly, but it’s also surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much thought.
On top of being functional, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has alternatives that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how durable the Flexispot is.
The practical cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, but this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this suggested it was going to be strong) and likewise a little hesitant (because we all understand how much of a difficulty putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I love the sleek look of this desk. I’m confident any of the many diverse finishes that it can be found in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or want to sleep on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
because video is quite kitted out as the desk we’re looking at today is quite standard I tried to get as close to that as I could on uplifts site with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to understand by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for go through the outside carton
for the desktop was not damaged in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had bought this I ‘d have been on the phone with customer support right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function strangely absolutely where any kind of cable management materials whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded too to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would provide this system over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s rub salt in the wound here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged also my prepare for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a cheaper replica of that it simply does not feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various alternatives and accessories I could however I think I’m better that they just sent a standard desk since as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of bonus is the relocation when the core product isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Sit
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to video gaming and productivity however I would invest the money it’s gon na require to enter into a greater end manufacturer like uplift desk or extremely desk and I have not personally utilized very desk products so I can’t speak on it however their track record is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a consumer standpoint you ‘d most likely be truly excited to get this in