today we’re having a look at a motorized sit-stand desk…Flexispot Soutien Ergonomic Office Chair… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to put together, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you do not think me.
The electrical raise/lower function is not just easy to use and quick, however it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without offering it much thought.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply an effect of how tough the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both excited (considering that this meant it was going to be durable) and likewise a little hesitant (since all of us know how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
Once put together, I enjoy the smooth appearance of this desk. I’m positive any of the many varied finishes that it is available in would look great in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop computer (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty basic I tried to get as near to that as I might on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is actually 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you must know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get doing not have even any cable television grommets for travel through the outside container
for the desktop was not harmed in any way which is absolutely unusual due to the fact that I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough guy if I had acquired this I ‘d have been on the phone with customer care instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function unusually absolutely where any kind of cable management materials whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the dual phase dual motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very peaceful as in barely audible this outside a rate would be the one advantage I would give this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper does not mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is definitely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed also my plan for this desk at this moment is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at finest seems like a cheaper replica of that it just does not feel quality and the difference between this desk and my main desk is night and day do feel free to take a look at their site as well which also feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering different options and devices I could but I believe I’m happier that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Soutien Ergonomic Office Chair
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would spend the additional money it’s gon na take to get into a higher end manufacturer like uplift desk or extremely desk and I have not personally utilized extremely desk items so I can’t speak on it however their reputation is great huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d probably be truly excited to get this in