today we’re having a look at a motorized sit-stand desk…Flexispot Spain… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly simply monitored) under an hour from start to finish.
It’s very sturdy and can hold a great deal of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you do not think me.
The electric raise/lower feature is not only easy to use and fast, however it’s likewise remarkably smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has choices that are far more inexpensive than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a substantial fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how sturdy the Flexispot is.
The convenient cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the guidelines.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this implied it was going to be strong) and likewise a little reluctant (since we all understand how much of a difficulty putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the instructions.
Is it worth getting a standing desk?
When put together, I enjoy the smooth appearance of this desk. I’m confident any of the many varied finishes that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Last but not least, this desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I could on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough male if I had actually bought this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded also to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is very quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift model over 35% more affordable even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift however cheaper does not imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft hits the sound and this baffle is definitely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and featured completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to check out their website too which likewise feels strangely comparable to one of their competitors there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous choices and devices I could however I believe I’m happier that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is 7 years if you are Flexispot Spain
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would spend the additional money it’s gon na take to get into a greater end maker like uplift desk or extremely desk and I haven’t personally utilized really desk items so I can’t speak on it however their track record is very good big thanks to flexi area for sending this out for evaluation regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters arrived damaged however from a client viewpoint you ‘d most likely be truly excited to get this in