today we’re having a look at a motorized sit-stand desk…Flexispot Sport Stair… you may have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very simple to put together, and it took my 11-year-old daughter and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Inspect out the video listed below of it operating while there’s an individual lying down on it if you do not think me.
The electrical raise/lower feature is not only easy to use and quickly, but it’s likewise surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being functional, it also looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more budget-friendly than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how tough the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to purchase an anti-fatigue mat to stay comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this implied it was going to be strong) and likewise a little reluctant (due to the fact that we all know how much of a difficulty putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I love the streamlined appearance of this desk. I’m positive any of the many varied finishes that it is available in would look terrific in any office, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as often times as you desire throughout the day.
Finally, this desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to sleep on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I tried to get as near to that as I might on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review but as you should know by now doesn’t affect my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can perhaps get lacking even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had purchased this I ‘d have been on the phone with client service instantly they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any type of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s inappropriate it’s add insult to injury here they include a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely frustrating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up harmed as well my plan for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie products without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to take a look at their website too which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering various alternatives and devices I might but I believe I’m happier that they only sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of extras is the relocation when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is 5 years and uplift desk is 7 years if you are Flexispot Sport Stair
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I haven’t personally utilized very desk products so I can’t speak on it but their track record is very good big thanks to flexi spot for sending this out for evaluation unfortunately I can not advise this unit and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with seeing as how both the desktop and the casters got here damaged however from a client standpoint you ‘d probably be truly thrilled to get this in