today we’re taking a look at a motorized sit-stand desk…Flexispot Stand Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s very simple to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you do not think me.
The electric raise/lower function is not only easy to use and fast, but it’s likewise surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without giving it much thought.
On top of being functional, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also helpful if your furry colleague likes to chew on or have fun with your cables.
Flexispot has choices that are far more budget friendly than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a big fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how tough the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this indicated it was going to be strong) and likewise a little reluctant (because all of us know how much of an obstacle putting together furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the directions.
Is it worth getting a standing desk?
As soon as assembled, I like the smooth look of this desk. I’m positive any of the many varied finishes that it comes in would look excellent in any office, and the adjustable width makes it easy to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, effective, and peaceful to switch in between sitting and standing as lot of times as you desire throughout the day.
Lastly, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop (or want to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty fundamental I tried to get as close to that as I might on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you must know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for travel through the outside carton
for the desktop was not damaged in any way which is utterly unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just extremely rough guy if I had actually acquired this I ‘d have been on the phone with client service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function oddly definitely where any kind of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated as well to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from simply under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this model does come basic with the control panel that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a cost would be the one advantage I would give this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the double motor three-stage design it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived damaged also my prepare for this desk at this point is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do feel free to have a look at their site also which also feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our precious time covering different choices and accessories I could however I believe I’m happier that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Stand Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and performance however I would invest the money it’s gon na take to enter a greater end manufacturer like uplift desk or extremely desk and I have not personally used really desk products so I can’t speak on it but their reputation is very good huge thanks to flexi area for sending this out for review sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a customer standpoint you ‘d most likely be truly thrilled to get this in