today we’re taking a look at a motorized sit-stand desk…Flexispot Stand Up Desk M3B… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really favorable.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily just supervised) under an hour from start to finish.
It’s incredibly strong and can hold a lot of weight. Inspect out the video below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more cost effective than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The plan that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable tray was a bit complicated to install. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (considering that this suggested it was going to be strong) and also a little hesitant (because all of us know just how much of a challenge assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
Once assembled, I enjoy the smooth appearance of this desk. I’m confident any of the many varied surfaces that it comes in would look great in any workplace, and the adjustable width makes it easy to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, effective, and quiet to switch between sitting and standing as sometimes as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to sleep on it for some reason) it has you covered. It will likewise equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as close to that as I might on uplifts website with similar configurations the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you must understand by now doesn’t impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is entirely unusual due to the fact that I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually acquired this I ‘d have been on the phone with customer service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function oddly absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double phase double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you upgrade this flexi area test to the dual motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive doesn’t mean cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is definitely shocking to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my prepare for this desk at this moment is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at finest seems like a less expensive replica of that it simply doesn’t feel quality and the distinction in between this desk and my primary desk is night and day do do not hesitate to check out their site also which also feels strangely similar to one of their competitors there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous options and devices I might but I believe I’m better that they only sent a fundamental desk because as a basic desk I’m not a fan of the quality assurance at this rate point and I do not think slapping on a lot of extras is the move when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Stand Up Desk M3B
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the money it’s gon na require to enter a higher end maker like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their credibility is great big thanks to flexi area for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters arrived damaged however from a customer standpoint you ‘d probably be actually thrilled to get this in