today we’re having a look at a motorized sit-stand desk…Flexispot Stand Up Desk… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely sturdy and can hold a lot of weight. If you do not think me, take a look at the video below of it operating while there’s an individual resting on it.
The electric raise/lower feature is not just easy to use and fast, however it’s likewise surprisingly smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also useful if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more inexpensive than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The convenient cable tray was a little bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (considering that this implied it was going to be durable) and also a little reluctant (since we all understand just how much of an obstacle assembling furniture can be).
Thankfully, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the guidelines.
Is it worth getting a standing desk?
When put together, I enjoy the streamlined look of this desk. I’m confident any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, effective, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop (or want to sleep on it for some reason) it has you covered. It will also evenly disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I might on uplifts website with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for evaluation however as you ought to know by now does not affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had actually acquired this I ‘d have been on the phone with client service instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded also to both the double stage double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a cost would be the one advantage I would provide this unit over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% less expensive even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely infuriating to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the difference between this desk and my primary desk is night and day do do not hesitate to check out their website also which likewise feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering different options and accessories I could however I think I’m happier that they only sent out a standard desk because as a fundamental desk I’m not a fan of the quality assurance at this cost point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Stand Up Desk
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in terms of gaming and productivity however I would invest the money it’s gon na take to enter a greater end maker like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived damaged however from a customer viewpoint you ‘d probably be truly excited to get this in