today we’re having a look at a motorized sit-stand desk…Flexispot Stand Up… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly durable and can hold a lot of weight. Check out the video listed below of it running while there’s a person lying down on it if you do not believe me.
The electric raise/lower function is not only easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being functional, it also looks great in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has alternatives that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just an effect of how durable the Flexispot is.
The convenient cable television tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both thrilled (given that this suggested it was going to be strong) and likewise a little reluctant (since we all understand just how much of an obstacle putting together furniture can be).
The good news is, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to switch between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re looking at today is quite basic I attempted to get as near to that as I could on uplifts site with equivalent configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really five inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review however as you need to know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can possibly get doing not have even any cable television grommets for pass through the outside container
for the desktop was not damaged in any way which is utterly bizarre because I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply super rough man if I had actually bought this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was really quite simple the whole thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each component to support motorized function unusually absolutely where any sort of cable management products whatsoever the frame on this system is a single motor dual stage design versus the double motor three-stage design that comes standard with the uplift desk this can be updated too to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would provide this system over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed too my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality office furniture that will last you this at best seems like a cheaper replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website also which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and devices I might however I believe I’m happier that they only sent out a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Stand Up
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance but I would spend the money it’s gon na take to enter a greater end maker like uplift desk or extremely desk and I have not personally used extremely desk items so I can’t speak on it however their credibility is very good huge thanks to flexi spot for sending this out for review regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a consumer perspective you ‘d most likely be actually thrilled to get this in