today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk 41″… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was extremely favorable.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily just supervised) under an hour from start to finish.
It’s very tough and can hold a great deal of weight. Inspect out the video listed below of it running while there’s a person lying down on it if you don’t believe me.
The electric raise/lower feature is not just easy to use and fast, but it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much thought.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or have fun with your cables.
Flexispot has options that are much more affordable than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (given that this indicated it was going to be sturdy) and also a little reluctant (because we all understand just how much of a challenge putting together furniture can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the sleek appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to sleep on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is pretty kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as close to that as I might on uplifts site with comparable configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you should know by now doesn’t affect my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly unusual since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough man if I had bought this I ‘d have been on the phone with customer care right away they did also handled to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each part to support motorized function strangely absolutely where any type of cable television management materials whatsoever the frame on this system is a single motor double stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded as well to both the dual phase dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this model does come standard with the control panel that allows for up-and-down movement plus 3 memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the similar uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift but less expensive doesn’t suggest low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add fuel to the fire here they consist of a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters showed up damaged too my prepare for this desk at this point is to lose the desk top and featured entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best feels like a less expensive imitation of that it just does not feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to check out their site too which also feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m happier that they only sent a basic desk due to the fact that as a standard desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for 3 years really desk is five years and uplift desk is seven years if you are Flexispot Standing Desk 41″
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and productivity but I would invest the extra money it’s gon na require to enter a greater end maker like uplift desk or extremely desk and I haven’t personally utilized extremely desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a problem with viewing as how both the desktop and the casters got here damaged however from a client standpoint you ‘d probably be truly excited to get this in