Find Flexispot Standing Desk 48 X 24 2022

today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk 48 X 24… you might have seen my evaluation on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.

It’s very simple to put together, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s extremely sturdy and can hold a great deal of weight. Check out the video listed below of it operating while there’s an individual lying down on it if you do not think me.

The electric raise/lower feature is not just easy to use and quickly, but it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being functional, it likewise looks excellent in my office (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a display stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or play with your cables.
Flexispot has options that are much more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a substantial fan of:

The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just a consequence of how sturdy the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both excited (since this suggested it was going to be strong) and also a little hesitant (because we all understand just how much of a challenge putting together furniture can be).

Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.

As soon as put together, I like the streamlined look of this desk. I’m positive any of the many varied finishes that it comes in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.

The quiet operation and height memory settings make it easy, efficient, and quiet to switch in between sitting and standing as lot of times as you desire throughout the day.

Last but not least, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it will not wiggle or wobble.

 

because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as close to that as I could on uplifts website with comparable setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you ought to understand by now doesn’t affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable grommets for travel through the outside carton

for the desktop was not harmed in any way which is entirely strange because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough guy if I had bought this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated too to both the dual stage dual motor and a three-stage dual motor which presses the expense of the desk up

an extra 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a rate would be the one benefit I would provide this system over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the similar uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still can be found in a hundred and seventy dollars less expensive than the uplift however cheaper doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal movement at this price point it’s undesirable it’s add fuel to the fire here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely frustrating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters showed up damaged too my prepare for this desk at this moment is to lose the desk top and featured completely and change it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops approximately 63 inches wide and 31 and a half inches deep so this will roll around the studio make it simpler to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furniture that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to check out their site too which also feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi area desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering numerous choices and devices I might however I think I’m happier that they just sent out a standard desk since as a fundamental desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a lot of extras is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk 48 X 24

in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to video gaming and performance but I would spend the extra money it’s gon na take to enter into a higher end maker like uplift desk or very desk and I have not personally utilized really desk products so I can’t speak on it however their track record is excellent big thanks to flexi area for sending this out for review sadly I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed but from a consumer viewpoint you ‘d probably be really delighted to get this in

Published