today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk 48 X 30… you might have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s really easy to put together, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s very sturdy and can hold a lot of weight. If you do not think me, have a look at the video listed below of it running while there’s a person resting on it.
The electric raise/lower feature is not only easy to use and quick, but it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you might wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also valuable if your furry coworker likes to chew on or have fun with your cables.
Flexispot has choices that are much more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of functions that I wasn’t necessarily a big fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfy, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (since this meant it was going to be sturdy) and also a little hesitant (because we all understand how much of a challenge putting together furniture can be).
Thankfully, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I enjoy the smooth look of this desk. I’m confident any of the many diverse finishes that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as lot of times as you desire throughout the day.
This desk is tough. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to take a nap on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it won’t wobble or wiggle.
because video is quite kitted out as the desk we’re taking a look at today is quite basic I attempted to get as near to that as I might on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you need to understand by now doesn’t affect my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outside carton
for the desktop was not harmed in any way which is absolutely unusual since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually purchased this I ‘d have been on the phone with customer support immediately they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any kind of cable management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage style that comes standard with the uplift desk this can be upgraded too to both the double phase double motor and a three-stage dual motor which pushes the cost of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than tall adequate even for me and I stay at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a cost would be the one advantage I would offer this unit over the uplift desk and I wish to be careful here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% more affordable even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift however cheaper does not mean cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this cost point it’s undesirable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters showed up damaged too my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality workplace furniture that will last you this at finest seems like a more affordable replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our precious time covering various alternatives and devices I might but I believe I’m better that they just sent out a fundamental desk since as a standard desk I’m not a fan of the quality assurance at this cost point and I don’t think slapping on a lot of additionals is the relocation when the core product isn’t what it should be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk 48 X 30
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency however I would spend the extra money it’s gon na require to enter into a higher end producer like uplift desk or extremely desk and I have not personally utilized really desk items so I can’t speak on it however their track record is very good huge thanks to flexi area for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here harmed however from a customer perspective you ‘d probably be actually thrilled to get this in