today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Assembly… you may have seen my evaluation on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.
It’s really easy to assemble, and it took my 11-year-old daughter and I (I mostly just supervised) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t believe me, check out the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it easy to change between the two without providing it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also practical if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are even more affordable than numerous other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a big fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how sturdy the Flexispot is.
The practical cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (because this meant it was going to be tough) and likewise a little hesitant (since all of us understand just how much of an obstacle assembling furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the smooth appearance of this desk. I’m confident any of the many varied finishes that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch in between sitting and standing as many times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant desktop (or want to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how out of balance the weight you place on it is, it won’t wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is pretty standard I tried to get as near to that as I might on uplifts site with similar setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for evaluation however as you should know by now does not affect my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre since I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with client service immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function oddly absolutely where any type of cable management materials whatsoever the frame on this unit is a single motor double phase style versus the dual motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase dual motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this design does come basic with the control board that enables up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor style uses this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would provide this system over the uplift desk and I wish to beware here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift model over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft hits this baffle and the noise is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived harmed as well my plan for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to movie products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a cheaper imitation of that it just doesn’t feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to check out their website also which likewise feels eerily comparable to one of their competitors there’s a wealth of devices you can get for the flexi spot desk as much as and including a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our precious time covering different alternatives and accessories I might however I believe I’m happier that they just sent out a basic desk since as a basic desk I’m not a fan of the quality control at this cost point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years very desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk Assembly
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to video gaming and efficiency but I would spend the money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally utilized very desk items so I can’t speak on it however their track record is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with seeing as how both the desktop and the casters arrived harmed however from a client standpoint you ‘d probably be truly thrilled to get this in