today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Base… you might have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was really positive.
It’s really simple to put together, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s extremely tough and can hold a lot of weight. If you don’t believe me, have a look at the video below of it running while there’s a person lying down on it.
The electric raise/lower feature is not only easy to use and quickly, however it’s likewise remarkably smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change in between the two without giving it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The convenient cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (considering that this implied it was going to be durable) and likewise a little hesitant (since we all know just how much of a challenge putting together furnishings can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When assembled, I love the streamlined appearance of this desk. I’m positive any of the many varied finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it easy, effective, and peaceful to change between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to sleep on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I attempted to get as near to that as I might on uplifts website with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is in fact 5 inches longer however you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you should understand by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get doing not have even any cable grommets for travel through the outdoors container
for the desktop was not damaged in any way which is utterly bizarre because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough male if I had bought this I ‘d have been on the phone with customer care immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each element to support motorized function oddly absolutely where any sort of cable television management products whatsoever the frame on this system is a single motor dual stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated also to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high adequate even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a rate would be the one advantage I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you upgrade this flexi spot test to the dual motor three-stage style it still comes in a hundred and seventy dollars less expensive than the uplift but more affordable does not imply cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s rub salt in the wound here they include a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely infuriating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed as well my prepare for this desk at this point is to lose the desk top and came with completely and change it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops approximately 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality office furnishings that will last you this at best seems like a cheaper imitation of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website as well which also feels eerily similar to among their competitors there’s a wealth of accessories you can get for the flexi area desk up to and consisting of a foot massager and even a fixed stationary bicycle and I could spend another 10 minutes of our valuable time covering numerous options and accessories I could but I think I’m better that they only sent a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a lot of bonus is the relocation when the core product isn’t what it need to be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Base
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and performance but I would spend the additional money it’s gon na take to get into a higher end manufacturer like uplift desk or extremely desk and I haven’t personally used extremely desk items so I can’t speak on it but their track record is great huge thanks to flexi area for sending this out for evaluation regrettably I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters got here damaged but from a consumer perspective you ‘d probably be truly excited to get this in