today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Buttons… you might have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was very favorable.
It’s really simple to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not believe me, check out the video listed below of it operating while there’s a person lying down on it.
The electric raise/lower function is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch in between the two without providing it much thought.
On top of being functional, it likewise looks terrific in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable tray keeps all of those charging cables arranged, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few functions that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a consequence of how durable the Flexispot is.
The hassle-free cable television tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a great idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (because this implied it was going to be durable) and also a little hesitant (because all of us understand just how much of a challenge assembling furnishings can be).
Fortunately, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the smooth appearance of this desk. I’m positive any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it simple, efficient, and quiet to change in between sitting and standing as often times as you desire throughout the day.
Last but not least, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a large desktop (or wish to rest on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is pretty standard I tried to get as close to that as I might on uplifts website with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is really five inches longer however you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you need to understand by now does not impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get lacking even any cable television grommets for travel through the outdoors container
for the desktop was not damaged in any way which is absolutely strange because I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply very rough man if I had bought this I ‘d have been on the phone with customer support right away they did also handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any sort of cable television management products whatsoever the frame on this unit is a single motor dual phase style versus the double motor three-stage style that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus three memory areas with an LED readout to tell you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is really quiet as in barely audible this outside a price would be the one advantage I would provide this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% cheaper even if you upgrade this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however more affordable doesn’t imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that however the lateral stability of this desk the horizontal movement at this cost point it’s unacceptable it’s rub salt in the wound here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes this baffle and the noise is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged also my plan for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at finest seems like a less expensive imitation of that it simply does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their site too which likewise feels eerily comparable to one of their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our precious time covering numerous choices and accessories I could but I believe I’m happier that they just sent a standard desk because as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not believe slapping on a bunch of additionals is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re just morbidly curious and they service warranty their desks for 3 years extremely desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk Buttons
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and efficiency but I would spend the additional money it’s gon na take to enter a greater end manufacturer like uplift desk or really desk and I have not personally used really desk items so I can’t speak on it however their credibility is very good big thanks to flexi area for sending this out for review unfortunately I can not advise this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with viewing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d probably be truly excited to get this in