today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Controls… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are plenty of things to love about the Flexispot E7. In general, my experience was very positive.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly just supervised) under an hour from start to finish.
It’s extremely durable and can hold a great deal of weight. If you do not believe me, check out the video below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it also looks excellent in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also handy if your furry coworker likes to chew on or have fun with your cables.
Flexispot has options that are much more budget friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will need to purchase an anti-fatigue mat to stay comfortable, but this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (since this meant it was going to be sturdy) and also a little reluctant (since all of us know just how much of a difficulty putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m positive any of the many diverse finishes that it comes in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to switch between sitting and standing as many times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you place on it is, it will not wobble or wiggle.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near that as I might on uplifts site with similar configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for review however as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get doing not have even any cable television grommets for travel through the outside carton
for the desktop was not damaged in any way which is entirely unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had bought this I ‘d have been on the phone with customer service instantly they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this unit is a single motor dual stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to simply over forty seven point six inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come standard with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very peaceful as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I wish to take care here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% cheaper even if you update this flexi area test to the double motor three-stage style it still is available in a hundred and seventy dollars less expensive than the uplift however less expensive doesn’t mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely provide it that however the lateral stability of this desk the horizontal motion at this price point it’s undesirable it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits the noise and this baffle is absolutely shocking to top things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters arrived harmed as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality office furnishings that will last you this at best feels like a more affordable replica of that it just does not feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their website also which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed exercise bike and I could spend another 10 minutes of our valuable time covering numerous alternatives and accessories I might however I think I’m happier that they just sent out a standard desk because as a standard desk I’m not a fan of the quality assurance at this rate point and I do not believe slapping on a lot of extras is the move when the core product isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk Controls
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would invest the additional money it’s gon na take to enter into a greater end maker like uplift desk or extremely desk and I haven’t personally used very desk items so I can’t speak on it but their track record is great huge thanks to flexi area for sending this out for review regrettably I can not advise this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d probably be truly delighted to get this in