today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk En1… you might have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to enjoy about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to assemble, and it took my 11-year-old child and I (I mainly simply supervised) under an hour from start to finish.
It’s super sturdy and can hold a great deal of weight. Examine out the video listed below of it operating while there’s an individual lying down on it if you don’t believe me.
The electrical raise/lower function is not just easy to use and quick, but it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without offering it much thought.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a display stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are even more economical than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, but this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this implied it was going to be sturdy) and likewise a little reluctant (since we all understand how much of a challenge assembling furnishings can be).
The good news is, with the help of a training YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
As soon as put together, I love the sleek look of this desk. I’m positive any of the many varied surfaces that it comes in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The quiet operation and height memory settings make it simple, efficient, and quiet to change between sitting and standing as sometimes as you want throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to take a nap on it for some reason) it has you covered. It will likewise evenly disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re taking a look at today is quite basic I tried to get as near that as I might on uplifts site with equivalent setups the flexi spot desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can potentially get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is absolutely unusual because I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough man if I had actually purchased this I ‘d have been on the phone with customer service immediately they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each component to support motorized function strangely definitely where any kind of cable management products whatsoever the frame on this unit is a single motor double stage style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual stage double motor and a three-stage double motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control board that enables up-and-down motion plus 3 memory spots with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a cost would be the one benefit I would provide this system over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you update this flexi area test to the double motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift however more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the noise is absolutely frustrating to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here harmed also my prepare for this desk at this point is to lose the desk top and included entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is a financial investment in quality office furniture that will last you this at best feels like a cheaper imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to have a look at their website also which also feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk up to and consisting of a foot massager and even a stationary exercise bike and I could spend another 10 minutes of our precious time covering numerous alternatives and accessories I could but I think I’m better that they only sent a fundamental desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this rate point and I don’t think slapping on a bunch of extras is the relocation when the core item isn’t what it ought to be they do use a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk En1
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and performance but I would spend the money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used really desk products so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with seeing as how both the desktop and the casters arrived harmed however from a client perspective you ‘d most likely be truly delighted to get this in