today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk Eq5… you may have seen my review on the uplift desk, if not …
In general, I need to state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s extremely easy to put together, and it took my 11-year-old daughter and I (I mainly simply supervised) under an hour from start to finish.
It’s extremely strong and can hold a lot of weight. Examine out the video below of it running while there’s an individual lying down on it if you don’t believe me.
The electric raise/lower function is not only easy to use and fast, however it’s also surprisingly smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much thought.
On top of being functional, it also looks great in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way as much as 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are even more budget-friendly than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t always a huge fan of:
The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this indicated it was going to be sturdy) and also a little reluctant (since we all know how much of a challenge putting together furniture can be).
Fortunately, with the help of an instructional YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the streamlined appearance of this desk. I’m positive any of the many diverse finishes that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to switch in between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or wish to take a nap on it for some reason) it has you covered. It will also equally distribute weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is quite kitted out as the desk we’re taking a look at today is pretty fundamental I attempted to get as near to that as I might on uplifts site with equivalent setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with five inches boom yes now for transparency flexi area did send this desk out for review however as you ought to understand by now doesn’t impact my evaluation in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until completion of April at the earliest the desktop is an inch thick but it’s this basic laminate as you can potentially get lacking even any cable television grommets for travel through the outside container
for the desktop was not damaged in any way which is absolutely strange since I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had actually bought this I ‘d have been on the phone with customer support immediately they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty simple the entire thing came together in about 45 minutes and despite the fact that there’s cables going to it from each part to support motorized function unusually definitely where any type of cable management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated also to both the double phase double motor and a three-stage double motor which pushes the cost of the desk up
an extra 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still comes in a hundred and seventy dollars more affordable than the uplift however less expensive does not indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is solid even if max height I’ll definitely give it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is absolutely frustrating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged also my plan for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality office furniture that will last you this at best feels like a less expensive replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their site also which likewise feels strangely comparable to among their rivals there’s a wealth of accessories you can get for the flexi spot desk up to and including a foot massager and even a fixed exercise bike and I might invest another 10 minutes of our valuable time covering different alternatives and devices I might but I believe I’m better that they just sent out a fundamental desk due to the fact that as a fundamental desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it should be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk Eq5
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and productivity but I would invest the additional money it’s gon na require to enter into a greater end maker like uplift desk or extremely desk and I have not personally utilized really desk items so I can’t speak on it but their reputation is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up damaged however from a consumer standpoint you ‘d probably be truly thrilled to get this in