today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Frame… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s extremely strong and can hold a great deal of weight. If you don’t think me, take a look at the video listed below of it running while there’s an individual resting on it.
The electric raise/lower feature is not only easy to use and quick, however it’s also remarkably smooth and quiet.
You can program your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without offering it much thought.
On top of being practical, it also looks terrific in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can suit smaller areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to include a monitor stand to your workstation).
The cable tray keeps all of those charging cables organized, which is also valuable if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how durable the Flexispot is.
The hassle-free cable tray was a little bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be sturdy) and likewise a little hesitant (due to the fact that we all understand how much of a challenge putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined look of this desk. I’m confident any of the many varied surfaces that it can be found in would look excellent in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it simple, efficient, and peaceful to switch in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 lbs even while in operation, so if you have a significant desktop computer (or want to sleep on it for some reason) it has you covered. It will also uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I might on uplifts site with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review but as you ought to know by now does not affect my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not delivering till completion of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can perhaps get doing not have even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is entirely unusual due to the fact that I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually bought this I ‘d have been on the phone with customer support instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty simple the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each element to support motorized function strangely definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual phase style versus the double motor three-stage design that comes standard with the uplift desk this can be updated also to both the double stage double motor and a three-stage dual motor which presses the expense of the desk up
an additional 70 bucks the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be slow is really quiet as in barely audible this outside a cost would be the one benefit I would give this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you update this flexi spot test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but cheaper does not indicate low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly give it that but the lateral stability of this desk the horizontal motion at this price point it’s unacceptable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and two of those four casters arrived harmed as well my prepare for this desk at this point is to lose the desk top and came with entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it simpler to movie products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at finest feels like a less expensive imitation of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do do not hesitate to take a look at their site too which likewise feels eerily comparable to one of their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our valuable time covering various options and accessories I might but I believe I’m happier that they just sent a basic desk because as a basic desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of bonus is the relocation when the core item isn’t what it need to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is five years and uplift desk is seven years if you are Flexispot Standing Desk Frame
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of video gaming and performance but I would invest the extra money it’s gon na take to enter into a higher end manufacturer like uplift desk or really desk and I haven’t personally used very desk products so I can’t speak on it however their track record is excellent huge thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with viewing as how both the desktop and the casters got here damaged but from a consumer viewpoint you ‘d probably be actually thrilled to get this in