today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Installation Instructions… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old daughter and I (I primarily simply supervised) under an hour from start to finish.
It’s super strong and can hold a lot of weight. If you do not believe me, have a look at the video listed below of it running while there’s a person resting on it.
The electrical raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without providing it much idea.
On top of being practical, it also looks fantastic in my workplace (I got the bamboo leading desk).
The width is likewise adjustable so it can suit smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a display stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise practical if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has options that are far more budget-friendly than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The package that the desk can be found in was heavy, so bringing it inside was a group effort, but this is just an effect of how durable the Flexispot is.
The practical cable television tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will need to purchase an anti-fatigue mat to remain comfortable, however this is a great concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both thrilled (because this meant it was going to be strong) and likewise a little hesitant (since we all know how much of a difficulty assembling furniture can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only problem I have with assembly was the cable television tray, which I discovered wasn’t explained well in the instructions.
Is it worth getting a standing desk?
As soon as put together, I love the sleek appearance of this desk. I’m confident any of the many varied surfaces that it can be found in would look fantastic in any office, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as lot of times as you want throughout the day.
Lastly, this desk is tough. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop (or want to sleep on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you place on it is, it will not wiggle or wobble.
in that video is pretty kitted out as the desk we’re looking at today is pretty fundamental I tried to get as near to that as I could on uplifts website with comparable configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi area did send this desk out for review however as you need to understand by now does not impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping up until the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for pass through the outside carton
for the desktop was not harmed in any way which is entirely unusual because I might shoot a 30-second b-roll montage of just the damage and defects on this desktop scuffed scraped pitted just very rough guy if I had purchased this I ‘d have been on the phone with customer care instantly they did likewise handled to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without mistakenly drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function oddly absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded as well to both the double stage dual motor and a three-stage dual motor which pushes the expense of the desk up
an extra 70 dollars the frame is developed for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty 7 point six inches so a max I ‘d it is more than tall adequate even for me and I remain at 6 foot for this model does come basic with the control panel that permits up-and-down movement plus 3 memory areas with an LED readout to inform you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is very quiet as in barely audible this outside a rate would be the one advantage I would provide this unit over the uplift desk and I want to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the comparable uplift design over 35% cheaper even if you update this flexi area test to the dual motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t mean inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely offer it that however the lateral stability of this desk the horizontal movement at this price point it’s unacceptable it’s rub salt in the wound here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits this baffle and the sound is definitely shocking to top things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged as well my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best seems like a less expensive imitation of that it simply doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their website as well which likewise feels strangely similar to among their competitors there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a stationary exercise bike and I could invest another 10 minutes of our precious time covering various alternatives and devices I could however I believe I’m better that they only sent out a basic desk because as a standard desk I’m not a fan of the quality assurance at this cost point and I do not think slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years extremely desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Installation Instructions
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and efficiency however I would invest the extra money it’s gon na require to enter into a higher end maker like uplift desk or very desk and I have not personally utilized extremely desk products so I can’t speak on it however their reputation is excellent big thanks to flexi spot for sending this out for evaluation sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters arrived harmed however from a client standpoint you ‘d probably be really delighted to get this in