today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Riser… you might have seen my evaluation on the uplift desk, if not …
In general, I need to say I like the Flexispot E7.
here are plenty of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very simple to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely durable and can hold a lot of weight. If you do not believe me, check out the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower feature is not just easy to use and fast, however it’s also remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to change between the two without providing it much idea.
On top of being practical, it likewise looks fantastic in my office (I got the bamboo leading desk).
The width is also adjustable so it can suit smaller spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable tray keeps all of those charging cables organized, which is likewise useful if your furry colleague likes to chew on or play with your cables.
Flexispot has options that are even more inexpensive than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The package that the desk came in was heavy, so bringing it inside was a group effort, however this is simply an effect of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the directions.
You will need to buy an anti-fatigue mat to stay comfy, however this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both fired up (given that this indicated it was going to be durable) and likewise a little hesitant (because we all understand just how much of a difficulty assembling furnishings can be).
Thankfully, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only problem I have with assembly was the cable television tray, which I found wasn’t described well in the instructions.
Is it worth getting a standing desk?
When assembled, I love the sleek appearance of this desk. I’m confident any of the many diverse surfaces that it can be found in would look fantastic in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as often times as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a large desktop computer (or wish to rest on it for some reason) it has you covered. It will also evenly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
because video is pretty kitted out as the desk we’re looking at today is pretty fundamental I attempted to get as near to that as I could on uplifts site with comparable setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift design is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for review but as you should know by now does not impact my review in any way the desktop here is 55 inches wide 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable grommets for travel through the outdoors carton
for the desktop was not harmed in any way which is absolutely bizarre since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just very rough male if I had actually bought this I ‘d have been on the phone with customer support right away they did also managed to miss drilling the pilot holes where you can connect the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface area to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor double phase design versus the dual motor three-stage style that comes requirement with the uplift desk this can be upgraded as well to both the double phase dual motor and a three-stage double motor which presses the expense of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from just under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this design does come standard with the control panel that enables up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is adjusted the motor operation itself while it might be slow is really quiet as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I wish to take care here because this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift model over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but less expensive doesn’t imply inexpensive this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll absolutely provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s unacceptable it’s add insult to injury here they consist of a little safety baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters showed up damaged also my prepare for this desk at this moment is to lose the desk top and featured all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to movie items without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a more affordable imitation of that it simply does not feel quality and the distinction in between this desk and my main desk is night and day do do not hesitate to check out their website as well which also feels strangely similar to among their rivals there’s a wealth of devices you can get for the flexi area desk up to and consisting of a foot massager and even a fixed exercise bike and I could invest another 10 minutes of our valuable time covering numerous choices and devices I might but I think I’m better that they only sent a fundamental desk since as a basic desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a lot of bonus is the move when the core product isn’t what it must be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for three years very desk is five years and uplift desk is seven years if you are Flexispot Standing Desk Riser
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na require to enter into a greater end producer like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it but their track record is excellent big thanks to flexi spot for sending this out for evaluation regrettably I can not recommend this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a concern with viewing as how both the desktop and the casters arrived harmed but from a client perspective you ‘d most likely be actually excited to get this in