today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk South Africa… you may have seen my evaluation on the uplift desk, if not …
In general, I must state I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was very favorable.
It’s extremely simple to assemble, and it took my 11-year-old child and I (I primarily simply supervised) under an hour from start to finish.
It’s extremely tough and can hold a great deal of weight. If you do not think me, take a look at the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower function is not just easy to use and fast, however it’s also surprisingly smooth and quiet.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much idea.
On top of being functional, it likewise looks terrific in my office (I got the bamboo leading desk).
The width is likewise adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might want to add a screen stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also handy if your furry coworker likes to chew on or play with your cable televisions.
Flexispot has alternatives that are even more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are minimal, here are a couple of features that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how sturdy the Flexispot is.
The practical cable tray was a little bit confusing to install. In the end, you eventually slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to stay comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both fired up (considering that this indicated it was going to be strong) and also a little hesitant (since we all understand just how much of an obstacle putting together furniture can be).
Luckily, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
As soon as assembled, I like the streamlined appearance of this desk. I’m positive any of the many diverse surfaces that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the smallest of office.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as sometimes as you want throughout the day.
This desk is durable. It can hold up to 335 lbs even while in operation, so if you have a large home computer (or want to take a nap on it for some reason) it has you covered. It will also evenly disperse weight no matter how unbalanced the weight you put on it is, it won’t wiggle or wobble.
because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as near that as I could on uplifts website with equivalent setups the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus 6 hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift model is actually five inches longer but you can do a lot with 5 inches boom yes now for openness flexi spot did send this desk out for review however as you ought to understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping till the end of April at the earliest the desktop is an inch thick but it’s this fundamental laminate as you can possibly get lacking even any cable grommets for travel through the outside container
for the desktop was not harmed in any way which is entirely strange since I might shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted simply extremely rough man if I had purchased this I ‘d have been on the phone with customer care instantly they did also managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was actually pretty straightforward the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function strangely definitely where any kind of cable television management products whatsoever the frame on this system is a single motor dual stage style versus the dual motor three-stage design that comes requirement with the uplift desk this can be upgraded too to both the dual phase double motor and a three-stage double motor which pushes the expense of the desk up
an extra 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from simply under 28 inches to simply over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control panel that allows for up-and-down movement plus three memory spots with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which has to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely peaceful as in barely audible this outside a price would be the one advantage I would give this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift model over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still can be found in a hundred and seventy dollars more affordable than the uplift but cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s unacceptable it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is absolutely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here damaged also my prepare for this desk at this point is to lose the desk top and came with entirely and change it with a white laminate lemon table from Ikea and use it as an adjustable picture table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furniture that will last you this at finest seems like a more affordable imitation of that it just does not feel quality and the difference between this desk and my main desk is night and day do do not hesitate to check out their website also which also feels strangely comparable to among their competitors there’s a wealth of accessories you can get for the flexi area desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I might invest another 10 minutes of our precious time covering numerous choices and accessories I could but I think I’m better that they just sent out a fundamental desk since as a fundamental desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the relocation when the core product isn’t what it must be they do offer a 30-day trial if you’re just morbidly curious and they service warranty their desks for three years really desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk South Africa
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in regards to video gaming and performance but I would invest the additional money it’s gon na take to enter into a greater end producer like uplift desk or really desk and I haven’t personally used extremely desk products so I can’t speak on it but their reputation is great huge thanks to flexi area for sending this out for review sadly I can not recommend this system and for the record I’m a hundred percent sure they would have gladly replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d most likely be really excited to get this in