today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Stability… you may have seen my review on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are plenty of things to enjoy about the Flexispot E7. In general, my experience was really favorable.
It’s really easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s incredibly sturdy and can hold a lot of weight. If you don’t believe me, check out the video listed below of it operating while there’s an individual lying down on it.
The electrical raise/lower feature is not just easy to use and quickly, however it’s also remarkably smooth and quiet.
You can configure your preferred standing and sitting heights, and it will remember them, making it easy to switch between the two without giving it much idea.
On top of being practical, it likewise looks great in my office (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller sized spaces.
It’s suitable for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also practical if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has choices that are far more inexpensive than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are minimal, here are a few features that I wasn’t always a huge fan of:
The bundle that the desk came in was heavy, so bringing it inside was a group effort, however this is just a repercussion of how strong the Flexispot is.
The convenient cable tray was a bit confusing to install. In the end, you eventually slip it under screws, which wasn’t extremely clear from the instructions.
You will require to buy an anti-fatigue mat to stay comfortable, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (since this suggested it was going to be strong) and also a little hesitant (because all of us know just how much of an obstacle assembling furnishings can be).
Luckily, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I found wasn’t described well in the directions.
Is it worth getting a standing desk?
When put together, I like the smooth look of this desk. I’m positive any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it simple, effective, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is strong. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I tried to get as near to that as I could on uplifts website with equivalent configurations the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is actually 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation but as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering till completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can possibly get lacking even any cable television grommets for pass through the outdoors container
for the desktop was not damaged in any way which is absolutely bizarre because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted just incredibly rough man if I had acquired this I ‘d have been on the phone with customer support instantly they did likewise managed to miss drilling the pilot holes where you can attach the control box to the desktop a great deal of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function strangely definitely where any type of cable television management products whatsoever the frame on this system is a single motor double stage design versus the dual motor three-stage design that comes standard with the uplift desk this can be updated too to both the dual stage double motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to just over forty 7 point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this model does come basic with the control board that permits up-and-down movement plus 3 memory areas with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one benefit I would offer this system over the uplift desk and I want to be careful here since this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift but more affordable does not imply cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll absolutely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes this baffle and the sound is absolutely infuriating to top things off I decided to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters arrived damaged also my prepare for this desk at this point is to lose the desk top and included all together and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift initially that is an investment in quality workplace furnishings that will last you this at best feels like a more affordable replica of that it just does not feel quality and the distinction between this desk and my main desk is night and day do do not hesitate to have a look at their site also which likewise feels strangely comparable to one of their rivals there’s a wealth of accessories you can get for the flexi area desk up to and including a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering different alternatives and devices I could however I think I’m happier that they just sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality control at this rate point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it need to be they do use a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Stability
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in regards to gaming and efficiency however I would invest the extra money it’s gon na take to enter into a greater end maker like uplift desk or extremely desk and I haven’t personally used really desk products so I can’t speak on it but their track record is very good huge thanks to flexi spot for sending this out for review unfortunately I can not recommend this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed but from a client standpoint you ‘d most likely be actually excited to get this in