today we’re taking a look at a motorized sit-stand desk…Flexispot Standing Desk Vs Autonomous… you might have seen my evaluation on the uplift desk, if not …
In general, I should state I like the Flexispot E7.
here are lots of things to love about the Flexispot E7. In general, my experience was very positive.
It’s very simple to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super tough and can hold a great deal of weight. If you do not think me, have a look at the video listed below of it operating while there’s an individual resting on it.
The electrical raise/lower function is not just easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being practical, it also looks great in my workplace (I got the bamboo top desk).
The width is likewise adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way up to 6′ 4″ (if you’re taller than 6′ 4″, you may want to add a screen stand to your workstation).
The cable television tray keeps all of those charging cables arranged, which is also useful if your furry coworker likes to chew on or have fun with your cable televisions.
Flexispot has choices that are much more affordable than many other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, however this is just a consequence of how sturdy the Flexispot is.
The hassle-free cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will require to purchase an anti-fatigue mat to remain comfortable, but this is a good idea for any standing desks, so I can’t fault Flexispot for that.
When it showed up and I saw how heavy it was, I was both ecstatic (given that this indicated it was going to be strong) and also a little reluctant (since we all understand just how much of a challenge assembling furnishings can be).
Luckily, with the help of a training YouTube link, it took me just around 42 minutes to assemble. Scratch that, it took my 11-year-old child, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as assembled, I love the sleek look of this desk. I’m confident any of the many diverse finishes that it is available in would look excellent in any workplace, and the adjustable width makes it simple to fit it in even the tiniest of home offices.
The quiet operation and height memory settings make it easy, efficient, and peaceful to switch between sitting and standing as often times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial home computer (or want to rest on it for some reason) it has you covered. It will likewise equally disperse weight no matter how unbalanced the weight you put on it is, it will not wiggle or wobble.
because video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near that as I could on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is really 5 inches longer but you can do a lot with five inches boom yes now for transparency flexi spot did send this desk out for review but as you must know by now does not affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming however it’s not shipping until completion of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can possibly get lacking even any cable television grommets for pass through the outside container
for the desktop was not harmed in any way which is utterly strange since I could shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough guy if I had bought this I ‘d have been on the phone with customer service instantly they did likewise handled to miss drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty straightforward the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any sort of cable television management materials whatsoever the frame on this system is a single motor dual stage style versus the double motor three-stage style that comes requirement with the uplift desk this can be updated also to both the dual phase double motor and a three-stage dual motor which presses the cost of the desk up
an extra 70 bucks the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than high enough even for me and I remain at 6 foot for this model does come standard with the control panel that permits up-and-down movement plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be adjusted as the width of the desk is adjusted the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would offer this unit over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the comparable uplift design over 35% more affordable even if you update this flexi area test to the double motor three-stage style it still comes in a hundred and seventy dollars cheaper than the uplift but cheaper does not imply inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll definitely offer it that but the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this rotating driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to top things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those four casters got here damaged too my plan for this desk at this point is to lose the desk top and came with all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to movie items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at finest feels like a less expensive imitation of that it just doesn’t feel quality and the difference in between this desk and my main desk is night and day do do not hesitate to take a look at their site also which likewise feels eerily similar to among their competitors there’s a wealth of devices you can get for the flexi area desk as much as and consisting of a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our precious time covering various choices and devices I could but I believe I’m better that they just sent a standard desk since as a basic desk I’m not a fan of the quality control at this price point and I don’t think slapping on a bunch of bonus is the move when the core item isn’t what it ought to be they do provide a 30-day trial if you’re just morbidly curious and they warranty their desks for three years really desk is 5 years and uplift desk is 7 years if you are Flexispot Standing Desk Vs Autonomous
in the market for a sit-stand desk they’re amazing mine’s been a life changer for me both in regards to gaming and productivity but I would invest the extra money it’s gon na take to enter a greater end manufacturer like uplift desk or extremely desk and I have not personally used extremely desk products so I can’t speak on it but their credibility is very good big thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this system and for the record I’m a hundred percent sure they would have happily changed the parts that I had an issue with seeing as how both the desktop and the casters showed up harmed but from a customer viewpoint you ‘d probably be truly excited to get this in