today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk With Drawer… you may have seen my review on the uplift desk, if not …
In general, I should say I like the Flexispot E7.
here are a lot of things to like about the Flexispot E7. In general, my experience was extremely positive.
It’s very easy to assemble, and it took my 11-year-old daughter and I (I primarily simply monitored) under an hour from start to finish.
It’s super durable and can hold a great deal of weight. If you don’t think me, check out the video listed below of it running while there’s an individual lying down on it.
The electric raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and quiet.
You can program your favored standing and sitting heights, and it will remember them, making it easy to switch in between the two without providing it much idea.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a display stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is also useful if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more economical than many other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t always a big fan of:
The plan that the desk was available in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t extremely clear from the directions.
You will require to purchase an anti-fatigue mat to stay comfortable, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (given that this meant it was going to be tough) and also a little hesitant (since all of us understand how much of an obstacle putting together furniture can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t discussed well in the instructions.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m confident any of the many varied surfaces that it comes in would look fantastic in any office, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and quiet to change between sitting and standing as sometimes as you desire throughout the day.
Finally, this desk is strong. It can hold up to 335 lbs even while in operation, so if you have a hefty desktop computer (or want to rest on it for some reason) it has you covered. It will likewise evenly distribute weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty basic I tried to get as near that as I could on uplifts site with similar setups the flexi area desk we’re taking a look at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift model is actually 5 inches longer but you can do a lot with 5 inches boom yes now for openness flexi area did send this desk out for evaluation however as you ought to know by now doesn’t impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can perhaps get doing not have even any cable television grommets for go through the outdoors container
for the desktop was not harmed in any way which is utterly strange since I might shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted simply incredibly rough guy if I had bought this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without inadvertently drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function strangely absolutely where any kind of cable television management products whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage style that comes standard with the uplift desk this can be updated also to both the double phase dual motor and a three-stage double motor which pushes the cost of the desk up
an additional 70 dollars the frame is designed for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high adequate even for me and I stay at 6 foot for this design does come basic with the control panel that allows for up-and-down motion plus three memory spots with an LED readout to tell you the desk height the single motor design utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is extremely quiet as in barely audible this outside a price would be the one benefit I would provide this unit over the uplift desk and I want to take care here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% less expensive even if you update this flexi area test to the dual motor three-stage style it still is available in a hundred and seventy dollars more affordable than the uplift however cheaper doesn’t indicate cheap this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have a problem with that the front to back stability of this desk is strong even if max height I’ll absolutely offer it that but the lateral stability of this desk the horizontal movement at this rate point it’s inappropriate it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a portion of this rotating driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the noise and this baffle is definitely shocking to leading things off I decided to include rolling casters to this desk this was a $30 upgrade and two of those four casters got here damaged as well my prepare for this desk at this point is to lose the desk top and featured all together and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops up to 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film products without having to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is an investment in quality workplace furnishings that will last you this at best seems like a cheaper imitation of that it simply does not feel quality and the distinction between this desk and my main desk is night and day do feel free to take a look at their website as well which likewise feels strangely similar to among their rivals there’s a wealth of accessories you can get for the flexi spot desk as much as and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering various alternatives and devices I might however I think I’m better that they just sent a standard desk since as a fundamental desk I’m not a fan of the quality control at this cost point and I don’t believe slapping on a bunch of extras is the relocation when the core product isn’t what it should be they do provide a 30-day trial if you’re simply morbidly curious and they warranty their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk With Drawer
in the market for a sit-stand desk they’re fantastic mine’s been a life changer for me both in terms of gaming and performance but I would invest the money it’s gon na require to get into a higher end producer like uplift desk or very desk and I have not personally utilized very desk items so I can’t speak on it however their track record is excellent huge thanks to flexi area for sending this out for evaluation sadly I can not advise this unit and for the record I’m a hundred percent sure they would have happily changed the parts that I had a concern with viewing as how both the desktop and the casters showed up harmed but from a consumer perspective you ‘d most likely be truly delighted to get this in