today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk…. you may have seen my review on the uplift desk, if not …

In general, I should state I like the Flexispot E7.

here are lots of things to love about the Flexispot E7. In general, my experience was really positive.

It’s extremely simple to put together, and it took my 11-year-old daughter and I (I primarily just monitored) under an hour from start to finish.
It’s very strong and can hold a lot of weight. If you do not think me, have a look at the video below of it running while there’s an individual resting on it.

The electric raise/lower feature is not just easy to use and quickly, however it’s also remarkably smooth and peaceful.
You can set your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without providing it much idea.
On top of being functional, it also looks excellent in my office (I got the bamboo top desk).
The width is also adjustable so it can suit smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to include a screen stand to your workstation).
The cable television tray keeps all of those charging cables organized, which is also valuable if your furry colleague likes to chew on or play with your cable televisions.
Flexispot has options that are even more cost effective than many other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
The cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:

The bundle that the desk can be found in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how strong the Flexispot is.
The practical cable television tray was a bit complicated to install. In the end, you ultimately slip it under screws, which wasn’t very clear from the instructions.
You will require to buy an anti-fatigue mat to remain comfortable, however this is an excellent concept for any standing desks, so I can’t fault Flexispot for that.

When it got here and I saw how heavy it was, I was both thrilled (since this implied it was going to be tough) and also a little reluctant (because all of us understand how much of a challenge putting together furnishings can be).

The good news is, with the help of an educational YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t described well in the guidelines.

Is it worth getting a standing desk?

Once assembled, I enjoy the smooth look of this desk. I’m confident any of the many varied finishes that it comes in would look great in any office, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it easy, effective, and quiet to switch in between sitting and standing as sometimes as you want throughout the day.

Finally, this desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty home computer (or want to take a nap on it for some reason) it has you covered. It will likewise uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.

 

because video is pretty kitted out as the desk we’re taking a look at today is quite standard I tried to get as close to that as I might on uplifts website with similar configurations the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus 6 hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift model is in fact five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi area did send this desk out for review however as you must understand by now does not impact my review in any way the desktop here is 55 inches large 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until the end of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can potentially get lacking even any cable grommets for pass through the outside container

for the desktop was not harmed in any way which is absolutely bizarre because I could shoot a 30-second b-roll montage of just the damage and flaws on this desktop scuffed scraped pitted just extremely rough guy if I had acquired this I ‘d have been on the phone with customer service immediately they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without accidentally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was actually quite uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables going to it from each component to support motorized function unusually definitely where any kind of cable television management materials whatsoever the frame on this system is a single motor dual phase design versus the dual motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up

an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to just over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I remain at 6 foot for this design does come standard with the control board that enables up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is changed the motor operation itself while it might be slow is really peaceful as in barely audible this outside a price would be the one benefit I would offer this unit over the uplift desk and I wish to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the similar uplift model over 35% more affordable even if you update this flexi spot test to the dual motor three-stage style it still can be found in a hundred and seventy dollars cheaper than the uplift however less expensive does not suggest cheap this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal motion at this rate point it’s undesirable it’s rub salt in the wound here they include a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft strikes the sound and this baffle is absolutely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed also my prepare for this desk at this moment is to lose the desk top and came with completely and replace it with a white laminate lemon table from Ikea and use it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches large and 31 and a half inches deep so this will roll around the studio make it much easier to film products without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift initially that is an investment in quality workplace furniture that will last you this at finest feels like a cheaper replica of that it just does not feel quality and the distinction in between this desk and my main desk is night and day do feel free to take a look at their website also which also feels eerily similar to one of their competitors there’s a wealth of accessories you can get for the flexi area desk approximately and including a foot massager and even a fixed exercise bike and I might spend another 10 minutes of our valuable time covering different options and accessories I might however I think I’m happier that they just sent a basic desk because as a basic desk I’m not a fan of the quality control at this price point and I don’t believe slapping on a lot of extras is the relocation when the core item isn’t what it should be they do offer a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is five years and uplift desk is 7 years if you are Flexispot Standing Desk.

in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in regards to gaming and productivity however I would invest the money it’s gon na require to get into a higher end manufacturer like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it but their credibility is great big thanks to flexi spot for sending this out for review regrettably I can not suggest this system and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters showed up damaged but from a client standpoint you ‘d most likely be really delighted to get this in

today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desk… you may have seen my review on the uplift desk, if not …

In general, I must state I like the Flexispot E7.

here are lots of things to like about the Flexispot E7. In general, my experience was extremely favorable.

It’s very simple to assemble, and it took my 11-year-old child and I (I mainly just supervised) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. If you do not believe me, check out the video below of it operating while there’s an individual resting on it.

The electric raise/lower feature is not only easy to use and quick, but it’s likewise remarkably smooth and quiet.
You can set your favored standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much thought.
On top of being practical, it likewise looks fantastic in my workplace (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller sized areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you might wish to add a screen stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is also valuable if your furry colleague likes to chew on or have fun with your cable televisions.
Flexispot has choices that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons

Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t always a huge fan of:

The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is just an effect of how sturdy the Flexispot is.
The convenient cable television tray was a little bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t really clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.

When it arrived and I saw how heavy it was, I was both fired up (considering that this suggested it was going to be sturdy) and likewise a little hesitant (because we all understand just how much of a challenge assembling furnishings can be).

Thankfully, with the help of an instructional YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old child, with some supervision from me, from start to finish. The only problem I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.

Is it worth getting a standing desk?

When put together, I love the sleek look of this desk. I’m confident any of the many varied finishes that it is available in would look excellent in any workplace, and the adjustable width makes it easy to fit it in even the smallest of home offices.

The quiet operation and height memory settings make it easy, efficient, and quiet to change in between sitting and standing as often times as you desire throughout the day.

Finally, this desk is strong. It can hold up to 335 pounds even while in operation, so if you have a large home computer (or wish to rest on it for some reason) it has you covered. It will also uniformly distribute weight no matter how out of balance the weight you put on it is, it won’t wiggle or wobble.

 

in that video is quite kitted out as the desk we’re looking at today is quite standard I attempted to get as near to that as I might on uplifts website with comparable setups the flexi spot desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a similar desk from uplift I try to get as close as possible with the uplift design is in fact five inches longer however you can do a lot with five inches boom yes now for openness flexi spot did send this desk out for evaluation but as you need to know by now does not impact my evaluation in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick however it’s this fundamental laminate as you can potentially get lacking even any cable television grommets for pass through the outdoors carton

for the desktop was not harmed in any way which is absolutely strange since I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just incredibly rough man if I had actually purchased this I ‘d have been on the phone with customer service right away they did likewise managed to miss out on drilling the pilot holes where you can attach the control box to the desktop a great deal of needing to do that myself without unintentionally drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface area to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions going to it from each component to support motorized function unusually definitely where any sort of cable management products whatsoever the frame on this unit is a single motor dual stage style versus the dual motor three-stage style that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which pushes the cost of the desk up

an additional 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per 2nd the height can vary from simply under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I stay at 6 foot for this model does come standard with the control panel that enables up-and-down movement plus three memory areas with an LED readout to inform you the desk height the single motor style utilizes this drive shaft assembly which needs to be changed as the width of the desk is adjusted the motor operation itself while it might be sluggish is very peaceful as in barely audible this outside a price would be the one advantage I would give this unit over the uplift desk and I want to beware here since this isn’t a hit piece this desk is 240 dollars cheaper than the comparable uplift design over 35% more affordable even if you update this flexi area test to the dual motor three-stage design it still is available in a hundred and seventy dollars less expensive than the uplift however more affordable doesn’t mean low-cost this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that but the lateral stability of this desk the horizontal motion at this cost point it’s undesirable it’s add fuel to the fire here they include a little security baffle this little steel piece that mounts to the frame and covers a part of this turning driveshaft when

this desk sees any lateral movement at all the drive shaft strikes this baffle and the noise is definitely infuriating to leading things off I decided to add rolling casters to this desk this was a $30 upgrade and two of those 4 casters got here harmed too my prepare for this desk at this point is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and utilize it as an adjustable photo table which you can’t do this frame will accommodate desktops as much as 63 inches wide and 31 and a half inches deep so this will roll around the studio make it easier to film items without having to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is a financial investment in quality office furnishings that will last you this at best seems like a cheaper replica of that it simply doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their website too which likewise feels eerily comparable to among their competitors there’s a wealth of accessories you can get for the flexi spot desk as much as and including a foot massager and even a stationary stationary bicycle and I could invest another 10 minutes of our precious time covering various options and devices I might but I believe I’m better that they just sent out a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this price point and I do not think slapping on a bunch of additionals is the move when the core product isn’t what it need to be they do offer a 30-day trial if you’re simply morbidly curious and they guarantee their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desk

in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity however I would invest the extra money it’s gon na take to enter a greater end maker like uplift desk or very desk and I have not personally utilized extremely desk items so I can’t speak on it but their reputation is excellent huge thanks to flexi spot for sending this out for review unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with seeing as how both the desktop and the casters got here damaged but from a customer perspective you ‘d most likely be really thrilled to get this in