today we’re having a look at a motorized sit-stand desk…Flexispot Standing Desks At Office Depot… you might have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really positive.
It’s very simple to assemble, and it took my 11-year-old daughter and I (I mostly just monitored) under an hour from start to finish.
It’s very durable and can hold a lot of weight. If you do not believe me, take a look at the video below of it operating while there’s an individual lying down on it.
The electrical raise/lower function is not just easy to use and fast, however it’s likewise surprisingly smooth and peaceful.
You can program your preferred standing and sitting heights, and it will remember them, making it simple to change in between the two without giving it much thought.
On top of being practical, it likewise looks excellent in my workplace (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized areas.
It’s suitable for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a monitor stand to your workstation).
The cable television tray keeps all of those charging cords organized, which is likewise valuable if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are much more cost effective than numerous other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a few features that I wasn’t necessarily a huge fan of:
The plan that the desk came in was heavy, so bringing it inside was a group effort, but this is simply a consequence of how sturdy the Flexispot is.
The convenient cable television tray was a bit confusing to set up. In the end, you ultimately slip it under screws, which wasn’t very clear from the guidelines.
You will need to buy an anti-fatigue mat to remain comfy, however this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it got here and I saw how heavy it was, I was both excited (given that this suggested it was going to be strong) and also a little hesitant (since all of us know just how much of a challenge putting together furnishings can be).
Fortunately, with the help of an educational YouTube link, it took me only around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some supervision from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I found wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
Once put together, I like the sleek look of this desk. I’m positive any of the many varied finishes that it can be found in would look terrific in any office, and the adjustable width makes it simple to fit it in even the smallest of office.
The quiet operation and height memory settings make it simple, effective, and quiet to switch between sitting and standing as lot of times as you want throughout the day.
This desk is sturdy. It can hold up to 335 lbs even while in operation, so if you have a substantial desktop computer (or want to rest on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wiggle or wobble.
in that video is quite kitted out as the desk we’re looking at today is pretty standard I attempted to get as near to that as I might on uplifts website with comparable configurations the flexi area desk we’re taking a look at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I attempt to get as close as possible with the uplift design is really 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you should know by now doesn’t impact my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering up until the end of April at the earliest the desktop is an inch thick but it’s this standard laminate as you can potentially get lacking even any cable television grommets for go through the outside container
for the desktop was not harmed in any way which is utterly strange because I could shoot a 30-second b-roll montage of simply the damage and flaws on this desktop scuffed scraped pitted just super rough guy if I had actually purchased this I ‘d have been on the phone with client service instantly they did also managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a lot of having to do that myself without inadvertently drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be attaching the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was really quite uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each element to support motorized function oddly definitely where any kind of cable television management products whatsoever the frame on this system is a single motor double phase style versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the double phase dual motor and a three-stage double motor which pushes the expense of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can vary from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than tall sufficient even for me and I remain at 6 foot for this model does come standard with the control board that allows for up-and-down motion plus 3 memory spots with an LED readout to tell you the desk height the single motor style utilizes this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a rate would be the one benefit I would offer this system over the uplift desk and I want to take care here due to the fact that this isn’t a hit piece this desk is 240 dollars cheaper than the equivalent uplift design over 35% less expensive even if you upgrade this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars more affordable than the uplift but more affordable does not suggest inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is solid even if max height I’ll definitely give it that but the lateral stability of this desk the horizontal motion at this cost point it’s inappropriate it’s add insult to injury here they consist of a little security baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft strikes the sound and this baffle is definitely shocking to leading things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here harmed as well my prepare for this desk at this moment is to lose the desk top and included completely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable image table which you can’t do this frame will accommodate desktops up to 63 inches large and 31 and a half inches deep so this will roll around the studio make it easier to film products without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality office furniture that will last you this at best feels like a more affordable imitation of that it just doesn’t feel quality and the difference between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely comparable to among their rivals there’s a wealth of devices you can get for the flexi spot desk approximately and consisting of a foot massager and even a fixed stationary bicycle and I could invest another 10 minutes of our valuable time covering various options and devices I might but I think I’m happier that they only sent a standard desk due to the fact that as a fundamental desk I’m not a fan of the quality assurance at this cost point and I do not believe slapping on a lot of additionals is the relocation when the core item isn’t what it must be they do use a 30-day trial if you’re simply morbidly curious and they service warranty their desks for 3 years really desk is 5 years and uplift desk is seven years if you are Flexispot Standing Desks At Office Depot
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of gaming and productivity but I would invest the extra money it’s gon na take to enter into a greater end manufacturer like uplift desk or really desk and I have not personally used extremely desk items so I can’t speak on it but their credibility is great big thanks to flexi area for sending this out for evaluation unfortunately I can not suggest this unit and for the record I’m a hundred percent sure they would have happily replaced the parts that I had an issue with viewing as how both the desktop and the casters showed up harmed however from a customer perspective you ‘d probably be actually thrilled to get this in