today we’re having a look at a motorized sit-stand desk…Flexispot Support… you may have seen my evaluation on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are a lot of things to love about the Flexispot E7. In general, my experience was really favorable.
It’s really simple to assemble, and it took my 11-year-old child and I (I mostly simply monitored) under an hour from start to finish.
It’s incredibly tough and can hold a lot of weight. Inspect out the video listed below of it running while there’s an individual lying down on it if you do not believe me.
The electric raise/lower feature is not only easy to use and quick, however it’s also surprisingly smooth and peaceful.
You can configure your preferred standing and sitting heights, and it will remember them, making it simple to switch between the two without providing it much idea.
On top of being functional, it also looks terrific in my office (I got the bamboo top desk).
The width is also adjustable so it can fit in smaller areas.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may want to include a screen stand to your workstation).
The cable tray keeps all of those charging cords organized, which is also handy if your furry colleague likes to chew on or play with your cables.
Flexispot has choices that are far more inexpensive than lots of other desks like it.
Flexispot Standing Desk Evaluation – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of features that I wasn’t necessarily a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is just a consequence of how strong the Flexispot is.
The convenient cable tray was a bit confusing to set up. In the end, you eventually slip it under screws, which wasn’t really clear from the directions.
You will need to purchase an anti-fatigue mat to remain comfortable, but this is a good concept for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both thrilled (since this implied it was going to be durable) and likewise a little reluctant (due to the fact that all of us understand how much of a challenge putting together furniture can be).
Fortunately, with the help of a training YouTube link, it took me only around 42 minutes to assemble. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable television tray, which I discovered wasn’t explained well in the guidelines.
Is it worth getting a standing desk?
As soon as put together, I enjoy the streamlined appearance of this desk. I’m confident any of the many diverse finishes that it is available in would look terrific in any workplace, and the adjustable width makes it easy to fit it in even the tiniest of home offices.
The peaceful operation and height memory settings make it easy, effective, and quiet to change in between sitting and standing as sometimes as you want throughout the day.
This desk is sturdy. It can hold up to 335 pounds even while in operation, so if you have a significant home computer (or wish to sleep on it for some reason) it has you covered. It will also equally disperse weight no matter how out of balance the weight you put on it is, it will not wobble or wiggle.
in that video is quite kitted out as the desk we’re taking a look at today is quite standard I attempted to get as close to that as I could on uplifts site with similar configurations the flexi area desk we’re looking at today will run you about four hundred and ten dollars versus six hundred and fifty for a similar desk from uplift I attempt to get as close as possible with the uplift design is actually five inches longer however you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for review but as you must know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not delivering until completion of April at the earliest the desktop is an inch thick however it’s this basic laminate as you can perhaps get lacking even any cable grommets for pass through the outside container
for the desktop was not harmed in any way which is absolutely strange because I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply super rough male if I had acquired this I ‘d have been on the phone with customer support immediately they did likewise managed to miss out on drilling the pilot holes where you can connect the control box to the desktop a great deal of having to do that myself without unintentionally drilling through the other side of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the ingrained metal inserts that we saw on the uplift desk so assembly aside from having to drill that top was in fact pretty uncomplicated the entire thing came together in about 45 minutes and despite the fact that there’s cable televisions running to it from each part to support motorized function unusually definitely where any kind of cable television management products whatsoever the frame on this unit is a single motor double phase design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded also to both the dual phase double motor and a three-stage double motor which presses the cost of the desk up
an additional 70 dollars the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from just under 28 inches to simply over forty seven point 6 inches so a max I ‘d it is more than high sufficient even for me and I stay at 6 foot for this design does come basic with the control board that permits up-and-down motion plus 3 memory areas with an LED readout to inform you the desk height the single motor design uses this drive shaft assembly which needs to be adjusted as the width of the desk is changed the motor operation itself while it might be sluggish is very quiet as in barely audible this outside a price would be the one benefit I would give this system over the uplift desk and I wish to be careful here because this isn’t a hit piece this desk is 240 dollars less expensive than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the dual motor three-stage design it still is available in a hundred and seventy dollars cheaper than the uplift but cheaper does not imply low-cost this desk is still over four hundred dollars if I had actually paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly provide it that however the lateral stability of this desk the horizontal movement at this rate point it’s undesirable it’s add fuel to the fire here they consist of a little safety baffle this little steel piece that installs to the frame and covers a part of this turning driveshaft when
this desk sees any lateral motion at all the drive shaft hits the sound and this baffle is absolutely infuriating to top things off I chose to include rolling casters to this desk this was a $30 upgrade and 2 of those four casters arrived harmed also my plan for this desk at this moment is to lose the desk top and featured entirely and replace it with a white laminate lemon table from Ikea and use it as an adjustable image table which you can’t do this frame will accommodate desktops as much as 63 inches broad and 31 and a half inches deep so this will roll around the studio make it much easier to film items without needing to adjust complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I discovered uplift first that is a financial investment in quality workplace furnishings that will last you this at best feels like a cheaper replica of that it just does not feel quality and the distinction between this desk and my primary desk is night and day do feel free to have a look at their website as well which also feels strangely similar to one of their rivals there’s a wealth of devices you can get for the flexi spot desk up to and including a foot massager and even a stationary stationary bicycle and I could spend another 10 minutes of our precious time covering various alternatives and devices I might but I think I’m happier that they only sent out a standard desk due to the fact that as a standard desk I’m not a fan of the quality assurance at this price point and I don’t believe slapping on a bunch of bonus is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years very desk is 5 years and uplift desk is seven years if you are Flexispot Support
in the market for a sit-stand desk they’re incredible mine’s been a life changer for me both in terms of gaming and efficiency however I would spend the extra money it’s gon na require to enter a higher end maker like uplift desk or really desk and I haven’t personally utilized very desk products so I can’t speak on it however their credibility is great huge thanks to flexi spot for sending this out for evaluation sadly I can not recommend this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had a problem with viewing as how both the desktop and the casters showed up harmed however from a consumer viewpoint you ‘d probably be really thrilled to get this in