today we’re having a look at a motorized sit-stand desk…Flexispot Tische… you might have seen my review on the uplift desk, if not …
In general, I must say I like the Flexispot E7.
here are lots of things to like about the Flexispot E7. In general, my experience was really positive.
It’s very easy to put together, and it took my 11-year-old child and I (I primarily just monitored) under an hour from start to finish.
It’s super strong and can hold a great deal of weight. If you don’t think me, take a look at the video below of it running while there’s a person lying down on it.
The electrical raise/lower function is not only easy to use and fast, but it’s also surprisingly smooth and peaceful.
You can configure your favored standing and sitting heights, and it will remember them, making it easy to change between the two without giving it much thought.
On top of being practical, it also looks excellent in my office (I got the bamboo leading desk).
The width is also adjustable so it can fit in smaller sized spaces.
It appropriates for users with heights from 4′ 2″ all the way approximately 6′ 4″ (if you’re taller than 6′ 4″, you may wish to add a monitor stand to your workstation).
The cable tray keeps all of those charging cords arranged, which is likewise helpful if your furry coworker likes to chew on or play with your cables.
Flexispot has alternatives that are far more cost effective than lots of other desks like it.
Flexispot Standing Desk Review – Cons
Cons: What I Didn’t Like About the Flexispot E7
Though the cons on this desk are very little, here are a couple of functions that I wasn’t always a substantial fan of:
The bundle that the desk was available in was heavy, so bringing it inside was a group effort, however this is simply a repercussion of how strong the Flexispot is.
The hassle-free cable tray was a bit complicated to set up. In the end, you eventually slip it under screws, which wasn’t very clear from the instructions.
You will need to buy an anti-fatigue mat to remain comfy, however this is an excellent idea for any standing desks, so I can’t fault Flexispot for that.
When it arrived and I saw how heavy it was, I was both excited (given that this implied it was going to be strong) and also a little hesitant (because we all know just how much of a challenge putting together furnishings can be).
Thankfully, with the help of an instructional YouTube link, it took me just around 42 minutes to put together. Scratch that, it took my 11-year-old daughter, with some guidance from me, from start to finish. The only hang-up I have with assembly was the cable tray, which I discovered wasn’t described well in the guidelines.
Is it worth getting a standing desk?
Once put together, I enjoy the sleek look of this desk. I’m confident any of the many diverse finishes that it comes in would look great in any workplace, and the adjustable width makes it simple to fit it in even the smallest of home offices.
The peaceful operation and height memory settings make it easy, efficient, and peaceful to change in between sitting and standing as often times as you desire throughout the day.
This desk is durable. It can hold up to 335 pounds even while in operation, so if you have a hefty desktop computer (or wish to take a nap on it for some reason) it has you covered. It will likewise uniformly disperse weight no matter how unbalanced the weight you place on it is, it won’t wobble or wiggle.
because video is pretty kitted out as the desk we’re taking a look at today is quite fundamental I tried to get as close to that as I might on uplifts website with similar setups the flexi area desk we’re looking at today will run you about four hundred and 10 dollars versus six hundred and fifty for a comparable desk from uplift I try to get as close as possible with the uplift model is in fact 5 inches longer but you can do a lot with 5 inches boom yes now for transparency flexi spot did send this desk out for evaluation however as you ought to know by now doesn’t affect my review in any way the desktop here is 55 inches broad 28 inches deep and comes as a $40 upgrade from the base size of 48 by thirty sixty by thirty is coming but it’s not shipping until the end of April at the earliest the desktop is an inch thick however it’s this standard laminate as you can perhaps get lacking even any cable grommets for pass through the outdoors carton
for the desktop was not damaged in any way which is absolutely strange due to the fact that I might shoot a 30-second b-roll montage of simply the damage and defects on this desktop scuffed scraped pitted simply extremely rough male if I had actually bought this I ‘d have been on the phone with customer service right away they did likewise handled to miss out on drilling the pilot holes where you can attach the control box to the desktop a lot of needing to do that myself without mistakenly drilling through the opposite of the desktop so yeah pilot holes in wood screws is how you’re gon na be connecting the surface to the frame that’s a far cry from the embedded metal inserts that we saw on the uplift desk so assembly aside from needing to drill that top was in fact pretty uncomplicated the whole thing came together in about 45 minutes and despite the fact that there’s cables running to it from each element to support motorized function unusually definitely where any type of cable television management products whatsoever the frame on this system is a single motor double stage design versus the double motor three-stage design that comes standard with the uplift desk this can be upgraded as well to both the double stage double motor and a three-stage dual motor which pushes the cost of the desk up
an extra 70 bucks the frame is created for a max load of 154 pounds and it moves at a rate at an inch per second the height can range from simply under 28 inches to just over forty seven point six inches so a max I ‘d it is more than tall enough even for me and I remain at 6 foot for this model does come standard with the control board that permits up-and-down motion plus three memory areas with an LED readout to inform you the desk height the single motor style uses this drive shaft assembly which has to be changed as the width of the desk is changed the motor operation itself while it might be sluggish is really peaceful as in barely audible this outside a cost would be the one advantage I would give this system over the uplift desk and I want to beware here due to the fact that this isn’t a hit piece this desk is 240 dollars more affordable than the equivalent uplift design over 35% cheaper even if you update this flexi spot test to the double motor three-stage design it still comes in a hundred and seventy dollars less expensive than the uplift however less expensive does not mean inexpensive this desk is still over four hundred dollars if I had paid over $400 for this desk I ‘d have an issue with that the front to back stability of this desk is strong even if max height I’ll certainly offer it that however the lateral stability of this desk the horizontal motion at this price point it’s inappropriate it’s add insult to injury here they include a little security baffle this little steel piece that installs to the frame and covers a portion of this turning driveshaft when
this desk sees any lateral movement at all the drive shaft strikes the noise and this baffle is definitely shocking to leading things off I chose to add rolling casters to this desk this was a $30 upgrade and 2 of those 4 casters got here damaged as well my plan for this desk at this point is to lose the desk top and included entirely and change it with a white laminate lemon table from Ikea and utilize it as an adjustable picture table which you can’t do this frame will accommodate desktops approximately 63 inches broad and 31 and a half inches deep so this will roll around the studio make it simpler to film items without needing to change complex or heavy slider setups and what I personally pay $400 for that no I lucked out that I found uplift first that is an investment in quality workplace furniture that will last you this at best feels like a cheaper replica of that it just doesn’t feel quality and the difference in between this desk and my primary desk is night and day do feel free to take a look at their site as well which likewise feels strangely comparable to among their competitors there’s a wealth of devices you can get for the flexi area desk approximately and including a foot massager and even a stationary exercise bike and I might invest another 10 minutes of our valuable time covering different alternatives and devices I might but I think I’m happier that they only sent a fundamental desk due to the fact that as a basic desk I’m not a fan of the quality control at this price point and I do not think slapping on a bunch of extras is the move when the core product isn’t what it ought to be they do offer a 30-day trial if you’re just morbidly curious and they guarantee their desks for 3 years extremely desk is five years and uplift desk is 7 years if you are Flexispot Tische
in the market for a sit-stand desk they’re remarkable mine’s been a life changer for me both in terms of video gaming and productivity however I would spend the money it’s gon na require to enter a higher end producer like uplift desk or extremely desk and I haven’t personally utilized very desk products so I can’t speak on it however their reputation is excellent huge thanks to flexi spot for sending this out for review sadly I can not suggest this unit and for the record I’m a hundred percent sure they would have gladly changed the parts that I had an issue with seeing as how both the desktop and the casters arrived harmed but from a customer perspective you ‘d most likely be actually excited to get this in